Our Brands

WOOD

  • Paslode
  • GRK Fasteners

CONCRETE

  • RedHead
  • Ramset
  • TapCon

STEEL & SPECIALTY

  • Buildex
Ramset RA27

RA27

Ramset’s fully automatic RA27 powder-actuated tool, lowering downtime and fatigue on commercial job sites. The RA27 stands up to the toughest use for interior and exterior applications

Quick info

SKU: RA27 Category:

Fully-Automatic Strip Tool— MOST COMMON APPLICATION DRYWALL TRACK TO CONCRETE!

ADVANTAGES

  • Lower pushdown force reduces fatigue
  • Long-lasting piston reduces downtime
  • Collar requires only ¼ turn for quicker cleaning
  • More power load-for-load provides flexibility in a wide range of applications
  • Power adjust dial provides the ability to dial down power for ideal pin embeddment
  • Patented RBC (Residue Build-up Channel) allows user to work longer between cleanings
  • Back end padding absorbs recoil, reducing fatigue
  • Belt/tether clip for safety
  • Swivel lift/scaffold hook keeps the tool within reach at all times

Click here to learn more about Powder Pins to use with this tool; Click here to learn more about Powder Loads to use with this tool.  Click here to find your nearest Authorized Ramset Tool Service Centre.

IMPORTANT!

Don’t forget to take and pass our Powder Actuated Tools Certification Course before operating a Ramset Powder Actuated Tool that uses Powder Loads and carry your license whenever operating a Powder Actuated Tool.  Certification is required.

PRODUCT SELECTION CHART

PLATED DRIVE PINS
Designed for use in concrete and structural steel applications. 100 per box.
PART
NUMBER		SHANK LENGTH
(IN./MM)		MASTER CARTON
QUANTITY
1503K1/2 Knurled (12.7mm)50
15063/4 (19.1mm)12
15081 (25.4mm)12
15101-1/4 (31.8mm)10
15121-1/2 (38.1mm)12
Shank diameter = .145 Head diameter = .300
PLATED DRIVE PINS WITH 7/8” WASHER
Washer increases bearing surface against the material to be fastened. Plated pin pre-assembled with 7/8” diameter washer.
PART
NUMBER		SHANK LENGTH
(IN./MM) 		MASTER CARTON
QUANTITY
1508SD1 (25.4mm)1000
1510SD1-1/4 (31.8mm)1000
1512SD1-1/2 (38.1mm)1000
Shank diameter = .145 Head diameter = .300
*Square washer indicates 3” pin has been installed.
POWERPOINT STEP SHANK PINS
Premium hard concrete and steel pin. 100 per box.
PART
NUMBER		SHANK LENGTH
(IN./MM) 		MASTER CARTON
QUANTITY
SP121/2 (12.7mm)1200
SP1001 (25.4mm)5000
SP178*1-7/8 (47.6mm)1000
Shank diameter = .150 * Head diameter= .150/.180
** Shank diameter = .125/.150 with 1/2” washer Head diameter = .300
TOP HAT DRIVE PINS
Used for general purpose fastening to steel. Plated pin with top hat. 100 per box.
PART
NUMBER		SHANK LENGTH
(IN./MM)		MASTER CARTON
QUANTITY
SP58TH5/8 (15.9mm)5000
Shank diameter = .150 Head diameter = .300
RAMSET .27 CALIBER LOADS
PART
NUMBER		POWER
LEVEL		COLOURPACKAGINGMASTER CARTON QUANTITY
C3RS273GREENAll 10 shot strip 10 strips/box600
C4RS274YELLOWAll 10 shot strip 10 strips/box600
C5RS275REDAll 10 shot strip 10 strips/box600
  • Part No.RA27
  • Length15"
  • Weight5.3 lbs
  • Muzzle Bushing O.D.9/16"
  • Maximum Pin Length: 1-1/2" (2" w/washer)

  • 3-year limited warranty

10-Shot, 0.27 Caliber, Strip Load

  • Green (P/N: C3RS27) – Power Level 3
  • Yellow (P/N: C4RS27) – Power Level 4
  • Red (P/N: C5RS27) – Power Level 5

Click here for information about our powder loads

Most Common Fasteners

  • 1-1/2” Plated Drive Pin w/ 7/8″ Washer (P/N: 1512SD) – Fasten 2×4 to concrete
  • 1/2” Powerpoint Step Shank Pin (P/N: SP12) – Fasten 2×4 to concrete
  • ¾” Plated Drive Pin (P/N: 1506) – Fasten drywall track to concrete

Click here for information about all of our pins

  • Safety glasses
  • Spall guard
  • Two cleaning brushes
  • Operators manual

Related products

Customer Service

1-800-387-9692

Where to Buy

Send Us a Message