Powder loads and Ramset tools meet tolerances to deliver optimum power within recognized national speed standards. Available in 10-load color-coded discs, 10-load strips and 100-load boxes.
Caution: Always test the fastener with the lowest power level for your tool. If more power is needed, use the next power level until the proper level and setting is achieved. Refer to the user manual for details. Obey all safety reminders. Users of the tool must be trained and qualified in accordance with federal law. Improper use can result in serious injury or death to users or bystanders. The power level is designated by the charge level number marked on each box and by the color of the box and each charge of powder. As the number increases, the power level increases.
Click here to view full catalog pages for powder charges
All charges are color coded and numbered according to charge level. As the number increases, the power level increases. Always start with the lightest load. If the fastener does not fit fully, use the next top load and repeat the process. The power level is designated by the charge level number marked on each box and by the color of the box and each charge of powder. As the number increases, the power level increases.
.
Remember to take and pass our Powder Operated Tool Certification Course before using a Ramset Powder Operated Tool. Carry your license whenever you use a powder actuated tool. Certification is required .
Single Shot Loads Use With:
Other Powder Actuated Tools
Strip Loads Use With:
Other Powder Actuated Tools
Pins and Loads
| C22CW | 2 - Brown | 100 / 0.2 | 1,200 / 2.4 |
| C32CW | 3 - Green | 100 / 0.2 | 1,200 / 2.4 |
| C42CW | 4 - Yellow | 100 / 0.2 | 1,200 / 2.4 |
| R50116 | 3 - Green | 25 | 125 |
| R50118 | 4 - Yellow | 25 | 125 |
| D621 | 4 - Yellow | 100 / 0.3 | 10,000 / 30 |
| C3RS27 | 3 - Green | 100 / 0.3 | 600 / 1.8 |
| C4RS27 | 4 - Yellow | 100 / 0.3 | 600 / 1.8 |
| C5RS27 | 5 - Red | 100 / 0.3 | 600 / 1.8 |
